How To Install Your Product

• WINDOW DECALS

Wet Install

* Minimum application temperature +40°F
* Applied decal temperature range -40°F to +180°F

What You Will Need: 

  • Rapid Tac or Water + Dish or Baby Soap 
  • Microfiber Cloth
  • Squeegee with soft edge (included with your purchase)
  • Masking Tape 

Steps: 

  1. Unroll the graphic and lay it flat.

  2. Clean the window thoroughly with Rapid Tac or warm soapy water and dry with a lint-free cloth.

  3. Before removing the plastic backing, place the decal in the desired position by using pieces of masking tape or any other strong tape that won’t leave a residue at the top center and bottom center of the graphic.

  4. Peel the vinyl graphic away from the paper backing. Once you have peeled back about half of the decal, cut the plastic backing off and discard it.

  5. Spray the exposed glass and adhesive side of the graphic with Rapid Tac or your mixture of soapy water. Using the included squeegee, apply the half of the graphic that has been pulled back by starting at the middle and working towards the end while applying medium pressure as you lay the graphic down.

    Take your time with this and keep tension on the graphic to avoid it laying down before you want it to.

  6. Repeat steps 4-5 for the other side of the window.